Thermal Aire Technologies, Inc.
106 North Medina Street
Medina, Ohio 44256
Phone: 800-232-3208
sales@thermalairetech.com
The largest selection of
hot air welding equipment
in North America.
Hot Air Tools Sales / Service / Repair
hot air welding equipment
in North America.
Hot Air Tools Sales / Service / Repair
Quick-L
 Quick-L
Technical Data |
||
| As a modification of the tried and tested QUICK-L-electronic, instead of the familiar infinite temperature setting, the QUICK-L features two permanent heat settings with additional cold setting. As tarpaulin, tent and awning welding often take place using one type of material in one welding width, this tool with heat settings is ideal for the professional processor. The tool heating capacity can be adapted to 20 or 40 mm wide push-on nozzles as required by tarpaulin manufacturers. | ||
| Voltage | V ~ | 120, 230 |
| Frequency | Hz | 50/60 |
| Temperature | °C | Selectable |
| Weight | Kg | 1.2 with 3m cord |
Test signs:
CCA certificated |
||
Quick-L Electronic Technical Data |
||
| For welding all thermoplastic materials. Applications include welding truck tarpaulins, tents, awnings and roof coverings, forming and shrinking, and soldering pipes and fittings. | ||
| Voltage | V ~ | 230 or 120 |
| Frequency | Hz | 50/60 |
| Heating Capacity | W | 1500 or 1300 |
| Temperature | °C | 20–700, infinitely variable |
| Weight | Kg | 112 with 3 m connecting cable |
| Test signs:
CCA certificated |
||
 Quick
Grand
Technical Data |
||
| The GRAND-L-electronic hot air blower is used
wherever hot air is needed for warming, heating, forming, shrinking and
activation. The heating capacity of either 2600 W or 3000 W, 230 V is
variable from room temperature up to 650 °C. The tool also features an
additional cold setting without heating preset adjustment. The air flow rate
is 450 litre/minute depending on nozzle. The air flow can be varied by means
of diverse push-on nozzles for numerous applications. The handle of the
integrated blower is ergonomic and small. The collector brushes are easy to
change from the outside without having to open the tool, enabling continuous
use. The GRAND-L-electronic weighs only 1360 g with 3 m connecting cable,
making it suitable as a hand-held tool for installation in diverse machines.
In the painting and decorating industry, the air flow of the
GRAND-L-electronic can be centered with a push-on wide slot nozzle to remove
old paint and varnish.
|
||
| Voltage | V ~ | 230 |
| Power consumption | W | 2600, 3000 |
| Air Flow Rate | l/m | 450 |
| Frequency | Hz | 50/60 |
| Temperature | °C | to 650 |
| Weight | Kg | 1.36 with 3m cord |
| Test signs:
CCA certificated |
||